The EEL1-SBL2-xx lights have varied uses in building props and scenery for themed entertainment and special effects projects. These lights use 24 LEDs encased in a clear silicone resin bulb. The molded silicone bulbs have a nominal height of 1.1” and a nominal diameter of 0.5”. The bulbs are for 12-volt DC power sources. They are non-polarized and are a standard G4 bi-pin style. When operated at 12 volts DC, the lights have a nominal power of 1 to 2 watts, depending on the bulb color.

The bulbs are paired with a mating cable socket assembly. The EEL1 (Enhanced Effects Light) cable socket assembly has a G4 socket at one end and a standard DC barrel connector of 2.1mm x 5.5mm size on the other.

The socket is designed to press fit mount into a 7/16” hole in various materials such as rigid foam or wood. The DC barrel connector end of the cable socket can pass through a 7/16” hole, while the taper body of the socket end can be press fit into the hole. The taper fit of the socket body locks it into place.  The flange on the front of the socket is a 5/8” diameter and limits the insertion depth.

The EEL1-SBL2 lamp cable socket assemblies are general-purpose low-voltage lights that find applications in various props, scenery, special effects, and themed entertainment projects. They are easy to integrate into various creative settings and may be powered by 12-volt DC battery packs or 12-volt DC lighting power supplies.

The lights are available with a short 10.5-inch cable socket or a long 5-foot cable socket. The photos show the short cable socket version.

The EEL lights are compatible with these effects controls:

1. FEC1 Flicker Effects Control, for embers, coal, candle, lantern props, general purpose flame simulation control.

2. FFC1, Fast Flicker Control, for a more dynamic flame appearance in various prop and scenery applications.